Although the previous part of this review tried to draw some conclusions, it’s not like this topic can ever be closed. Several new brands of metallic paints were made available since and here I’m taking a look at AK Interactive Xtreme Metal and True Metal ranges. To bring some balance I’m also checking out an old-timer, Humbrol metallics. Continue Reading →
P-51D Mustang Pacific VLR version 1/48 Build log – Part Three
Almost a year later, which is quite obviously becoming a tradition, a next instalment. Thankfully, there was some actual progress during this time, and recently even more so. Continue Reading →
P-51D Mustang Pacific VLR version 1/48 Build log – Part Two
It’s been more than a year since the previous installment of this series, so it’s probably a good time to continue. Continue Reading →
Metallic paints for scale modeling, Review – Part Two
As promised previously, here goes the second part of metallic paints review. Read the first part by this link. This time we’ll check out Gunze Buffable Metallics, Gunze Super Metallics and Tamiya metallic paints. We also will draw some conclusions about which paints fit best to some of the specific modeling needs. Continue Reading →
Metallic paints for scale modeling, Review – Part One
The time has come to put an end to uncertainty regarding the choice of metallic paints in modeling. This is a topic of much hesitance for many, but it no longer has to be. See, I spent some time to figure out the variety of options and techniques out there and now my knowledge is yours as well. Continue Reading →
P-51D Mustang Pacific VLR version 1/48 Build log – Part One
One of my personal favorites, a widely loved aircraft, P-51D Mustang, is on my desk. Continue Reading →
U-Boat Type VII-C 1/72 Build log – Part Five
Well, not really a build part, but a milestone of sorts. The build was on hold while I was thinking what to do with the drain holes and also while I spent valuable modeling time building planes. This build goes on for about two years now and not because it’s that difficult. True, there is a lot to be done but I like to approach each step with sincere desire for perfection instead of pressure of hasty completion. So, I’m taking my time with this one. Continue Reading →
U-Boat Type VII-C 1/72 Build log – Part Four
Past steps shown I have to really focus on torpedo gates. Quick putty-sand attack didn’t work and the PE part seam just wouldn’t go. My main concern was the choice of putty. I came to the conclusion Tamiya putty was far from ideal product for the task and as you have seen earlier, tried Milliput. Continue Reading →
U-Boat Type VII-C 1/72 Build log – Part Three
The last session left seams on saddletanks not perfectly smooth, so it took a little bit more work. Continue Reading →
U-Boat Type VII-C 1/72 Build log – Part Two
The work on board walls above saddletanks continues. Continue Reading →